Rail Technology International (RTI) Products - Ultrasonic Flaw Testing Specialists

805SX - Weld & Rail Tester

The 805SX is a portable handheld ultrasonic tester 805sx Handheld designed for detection of flaws in steel – a single channel version of the equipment used in the RTI 8000SX rail test vehicles.

It has the capability to detect very small reflectors combined with smart interpretation software to make it usable by field crews. The 805SX is user friendly and only requires a basic understanding of the principles of ultrasonic inspection to inspect and size defects with a high degree of accuracy and a quality assurance of inspection, while maintaining standards and producing consistent results.

Convenience & simplicity
Powerful & user friendly
Instant Feedback

Specifications

Display
40 pixels (LEDs) Depth
12 pixels (LEDs) Signal strength/Battery level
Display Update Rate
Min 60Hz
Sensitivity
1mm side drilled hole detectable at all depths
Test Modes
Pulse Echo
Warranty
One year except battery -6 months. (Battery life is 200 deep discharge cycles)
Preset Transducer Calibration
Inbuilt Distance Amplitude correction for rail steel.
Reject
0% to 80% of full scale in 8 increments
Units
metric or imperial
Alarms
Selectable threshold within depth range
Material Velocity
Preset for rail steel for all probes
Range
200mm to suit 31kg-68kg (60lb-141lb rail)

Operating Temperature
0°C to 50°C (-5°F to 120°F)
Storage Temperature
-20°C to 70°C (-40°F to 160°F)
Charging Temperature
0°C to 30°C (-40°F to 80°F)
Power Requirements
Mains: 110 240 VAC, 50 60Hz or 12 Volts DC. Charge Power Max = 12W
Battery
Internal Rechargeable SLA Gel Cell battery pack. Recharge time 5 Hours Battery life 3 hours continuous typical 1-2 days normal operation.
Charger Specification
Input = 100-240V ~ 0.4A 47-63hz
Output = +12V – 1.5A
Pulser Type
Fixed 2.25MHz square wave
Pulse Voltage
100Volts
Rectification
Full Wave,
Dimensions
200mm x 185mm x 52mm (folded)
(7.88” x 7.28” x 2.05”)
Weight
4.61bs. (2.3 Kg) including battery & mains charger